diff --git a/Bindings/clock/ti/apll.txt b/Bindings/clock/ti/apll.txt
new file mode 100644
index 0000000..ade4dd4
--- /dev/null
+++ b/Bindings/clock/ti/apll.txt
@@ -0,0 +1,45 @@
+Binding for Texas Instruments APLL clock.
+
+Binding status: Unstable - ABI compatibility may be broken in the future
+
+This binding uses the common clock binding[1].  It assumes a
+register-mapped APLL with usually two selectable input clocks
+(reference clock and bypass clock), with analog phase locked
+loop logic for multiplying the input clock to a desired output
+clock. This clock also typically supports different operation
+modes (locked, low power stop etc.) APLL mostly behaves like
+a subtype of a DPLL [2], although a simplified one at that.
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+[2] Documentation/devicetree/bindings/clock/ti/dpll.txt
+
+Required properties:
+- compatible : shall be "ti,dra7-apll-clock" or "ti,omap2-apll-clock"
+- #clock-cells : from common clock binding; shall be set to 0.
+- clocks : link phandles of parent clocks (clk-ref and clk-bypass)
+- reg : address and length of the register set for controlling the APLL.
+  It contains the information of registers in the following order:
+	"control" - contains the control register offset
+	"idlest" - contains the idlest register offset
+	"autoidle" - contains the autoidle register offset (OMAP2 only)
+- ti,clock-frequency : static clock frequency for the clock (OMAP2 only)
+- ti,idlest-shift : bit-shift for the idlest field (OMAP2 only)
+- ti,bit-shift : bit-shift for enable and autoidle fields (OMAP2 only)
+
+Examples:
+	apll_pcie_ck: apll_pcie_ck {
+		#clock-cells = <0>;
+		clocks = <&apll_pcie_in_clk_mux>, <&dpll_pcie_ref_ck>;
+		reg = <0x021c>, <0x0220>;
+		compatible = "ti,dra7-apll-clock";
+	};
+
+	apll96_ck: apll96_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap2-apll-clock";
+		clocks = <&sys_ck>;
+		ti,bit-shift = <2>;
+		ti,idlest-shift = <8>;
+		ti,clock-frequency = <96000000>;
+		reg = <0x0500>, <0x0530>, <0x0520>;
+	};